Sennheiser HD 660S2 review

Three years after the release of the HD 660S, Sennheiser is back with a refresh: the HD 660S2. Billed as a successor to the original high-end headphones but with a more “relaxed” sound, this new entry have a lot to prove. Does it offer a compelling reason to buy over the rest of the Sennheiser stable?

Editor’s note: this is the first version of the article. Updates will follow as the market changes.

What’s it like to use the Sennheiser HD 660S2?

The Sennheiser HD 660S2 is a set of high-end open-back headphones, and true to its role has a lot in common with cans in this niche. Specifically: it’s built for sound quality and sound quality only, so there’s little in the way of advanced features or frills, instead focusing on comfort and performance above any other concern.

The large driver elements are housed in rigid plastic with an open-back grille, allowing for the impression of more “natural” sound in a quiet environment. Open backs aren’t without their tradeoffs, though, as they’ll let in all the noise around you as well. This may not be a drawback for your use case, but it’s important to remember that open-back headphones will not only let in all the noise around you, but these products will also leak sound to anyone within earshot. Headphones don’t require a high loudness because your ears are very close to the drivers, but if you’re really rockin’ out, someone else could hear what you’re listening to.

Each ear cup is ringed by a velour ovoid pad that is fairly pliable and not very stiff. Because the pad is so large and the band is very rigid, the Sennheiser HD 660S2 distributes its weight fairly well—but if you crank them down too tightly it does lead to some fatigue. I can clear 6 hours of continuous listening time no sweat when fit properly.

On the bottom of each ear cup are the proprietary 2 pin push connectors Sennheiser’s been using for years, so getting your own replacements should be easy if something happens to the stock cable. Unfortunately the cable is a standard Y shape, meaning that it’s more likely to get caught on something should you be in tight quarters.

How does the Sennheiser HD 660S2 connect?

Just like its predecessor, the Sennheiser HD 660S2 connects to your source via the included 1.8 meter cable. Said cable terminates in a 1/4 inch TRS plug, with 2 pin plugs at the top of the Y-shaped cable connecting into each ear cup. Like with other products that do the whole TRS termination “backwards” (using a dongle to offer a 3.5mm plug instead of an adapter to get a 1/4 inch one), I want to note the design here is very inconvenient if you change sources often. Lots of other products—including some from Sennheiser—have managed to use the threaded 1/4 adapter on top of a 3.5mm plug without much hassle, and it doesn’t add even more cable length or the need for fabricating more parts. Of course, if these headphones are going to live by a desk and never leave, it isn’t an issue. It’s just a strange design choice that probably shouldn’t exist anymore.

As the cable is removable, that also means it’s replaceable with the compatible options sold by Sennheiser. This is huge for longevity, and also allows you to tinker if you need a longer cable. We caution you not to go too deep down the audiophile cable rabbit hole—it really doesn’t matter what cables you get if they can satisfy the requirements of the headphones, and basically everything will.

Inside the packaging is a supplementary cable that terminates in a 4.4mm Pentaconn connector. This allows the use of headphone amps with balanced outputs for higher voltage levels, but we’re willing to bet that only a handful of HD 660S2 buyers are going to be using this cable simply due to the fact that the TRS plug is more than capable of making the most of these headphones.

How does the Sennheiser HD 660S2 sound?

Editor’s note: this review makes use of a hover-enabled glossary to describe sound quality, based on a consensus vocabulary. You can read about it here.

The Sennheiser HD 660S2 sounds every bit as good as it should for the price. The main bone of contention here is more a matter of taste than objective performance.

Our tests show that you don’t need to worry about distortion or compression (just look at the chart)as you increase the loudness of the headphones—and if you do hear those things, something else is going on. The effort poured into the headphone drivers themselves is evident: they’re solidly competent at what they’re meant to do.

Should you buy the Sennheiser HD 660S2?

As this set of headphones is firmly aimed at enthusiasts and not professionals or the mass market, I’d say that you should consider the Sennheiser HD 660S2 if and only if you’re looking for a set of headphones that sound like the HD 660S, but you don’t want to EQ in a bass lift. At release, the nearly $600 USD headphones are fine—good, even—but the Sennheiser HD 660S2 doesn’t really set itself apart from cheaper options in its own product line. If you already own the original HD 660S, or the HD 600, save your money.

It’s very likely that over time you’ll see the price drop for the new HD 660S2. If that happens we have no issue recommending these cans for someone looking for that sound. The main drawback here is simply price and little else. If money is no object: absolutely put this product on your radar—just remember that at $600 USD there’s a ton of options out there that may fit you better, depending on your needs and preferences.

What should you get instead of the Sennheiser HD 660S2?

If you want a more neutral sound (while coincidentally saving yourself some money), we like to recommend the Sennheiser HD 600 or Sennheiser HD 560S. Both of these models offer variations on the Sennheiser sound, but at a dramatically reduced price compared to the HD 660S2.

For the money you’d sink on the Sennheiser HD 660S2, you could also pick up a set of headphones that use other driver types. For example, a planar magnetic product like the HiFiMan Sundara could also tickle your fancy at under $400 USD. However, that model is nowhere near as durable or comfortable as the competing Sennheiser options.

If you’re looking to save a little money, you could also pick up the older Sennheiser HD 660S. However, it doesn’t emphasize bass as much, so the sound won’t be the same (even if it’s comparable). Really the major differences here can almost be equalized away if you are able to make some adjustments with a program like Equalizer APO or Roon.

Frequently asked questions